应届毕业生
本科
2025-06-08 19:39:55
409人关注
职位描述
该职位还未进行加V认证，请仔细了解后再进行投递！
Tasks
Holder of this position is responsible for the specific CoC validation on cell, module and pack level according to legal and internal requirements for buy and make projects in close cooperation with suppliers, internal partners and BMW AG.
Key Responsibilities
Ensure the validation CoC competency is fulfilled. He/She should fully understand the requirements, standards and test specifications and he/she can steer the validation test accordingly
Plan resources of external labs and measurement equipment (inc. selection and further development) which are capable to deliver according to project plan
Review requirement and propose the test case to cover the requirement or propose the argument to reject the requirement. Based on the requirement to create the test specification and clarify the parameters for each projects
Support the validation manager for the change evaluation. Deliver the proposal for the test item for the technical changes
Ensure all up to date test documentation is available for the responsible test engineer/test lab/ post analysis. Ensure validation reports with clear conclusions are created and made available for review. Update validation status in JIRA/C-place. He/She need to regular exchange with BMW CoC counterpart and work closely with validation engineer for the testing dat and detailed measurement
Pro-actively seek out solutions to problems and use BBA resources to find unavailable information (e.g. new project specs, simulation results, etc)
Clearly communicate technical issues (from test lab or wherever) to lead CoC for further internal analysis, before validation report is released. This request the relative information is ready and pre-analysis is done
Continuously improving the specific CoC validation efficiency and effectiveness (e.g. Process, tooling, measurement and test concept). He/She would deep investigate the specific CoC details and deliver change proposal
3. Scope of Communication / Negotiation
Qualifications
? Bachelor, Master or PhD degree in electrical engineering, electrical power engineering, mechanical engineering, software engineering or related majors
? Understanding of architectures and components in hybrid and electric vehicles
? HV battery management systems and functions
? Understanding of HV battery electric /thermal/ mechanical behavior at cell and pack level
? Test data management and analysis tools
? knowledge in measurement and CAN communication tools (INCA, CANalyzer,…)
? Good knowledge in HV system relative standards ISO, VDA, GB/T, ECE, GS, DIN, etc
? Good knowledge in Microsoft office
? Strong project management and planning skills
? Self-responsible and reliable working attitude even under pressure
? Analytic skills and structured working methods
? Languages skills: German and English business fluent. Basic knowledge in Chinese preferable
? Very good communication skills and ability to stand your ground in difficult situations
? Willingness to frequent travelling inside China and extended trips to Munich (2 to 12 weeks)
? Excitement for new energy vehicles and testing operations
Experience
? Working experience as engineer in software development, function development, E/E integration, HVB or vehicle validation or calibration 4-6 Years
? Working experience in the automotive development for powertrain or vehicle electronics 1-3 Years
? Working experiences with control unit, bus communication and vehicle functional structure 1-3 Years
? Working experiences with high voltage systems like HV batteries and E-motors, electric energy converters and bus communication 1-3 Years
? Optional international experience based on working overseas incl. frequent business trips 1-3 Years
Holder of this position is responsible for the specific CoC validation on cell, module and pack level according to legal and internal requirements for buy and make projects in close cooperation with suppliers, internal partners and BMW AG.
Key Responsibilities
Ensure the validation CoC competency is fulfilled. He/She should fully understand the requirements, standards and test specifications and he/she can steer the validation test accordingly
Plan resources of external labs and measurement equipment (inc. selection and further development) which are capable to deliver according to project plan
Review requirement and propose the test case to cover the requirement or propose the argument to reject the requirement. Based on the requirement to create the test specification and clarify the parameters for each projects
Support the validation manager for the change evaluation. Deliver the proposal for the test item for the technical changes
Ensure all up to date test documentation is available for the responsible test engineer/test lab/ post analysis. Ensure validation reports with clear conclusions are created and made available for review. Update validation status in JIRA/C-place. He/She need to regular exchange with BMW CoC counterpart and work closely with validation engineer for the testing dat and detailed measurement
Pro-actively seek out solutions to problems and use BBA resources to find unavailable information (e.g. new project specs, simulation results, etc)
Clearly communicate technical issues (from test lab or wherever) to lead CoC for further internal analysis, before validation report is released. This request the relative information is ready and pre-analysis is done
Continuously improving the specific CoC validation efficiency and effectiveness (e.g. Process, tooling, measurement and test concept). He/She would deep investigate the specific CoC details and deliver change proposal
3. Scope of Communication / Negotiation
Qualifications
? Bachelor, Master or PhD degree in electrical engineering, electrical power engineering, mechanical engineering, software engineering or related majors
? Understanding of architectures and components in hybrid and electric vehicles
? HV battery management systems and functions
? Understanding of HV battery electric /thermal/ mechanical behavior at cell and pack level
? Test data management and analysis tools
? knowledge in measurement and CAN communication tools (INCA, CANalyzer,…)
? Good knowledge in HV system relative standards ISO, VDA, GB/T, ECE, GS, DIN, etc
? Good knowledge in Microsoft office
? Strong project management and planning skills
? Self-responsible and reliable working attitude even under pressure
? Analytic skills and structured working methods
? Languages skills: German and English business fluent. Basic knowledge in Chinese preferable
? Very good communication skills and ability to stand your ground in difficult situations
? Willingness to frequent travelling inside China and extended trips to Munich (2 to 12 weeks)
? Excitement for new energy vehicles and testing operations
Experience
? Working experience as engineer in software development, function development, E/E integration, HVB or vehicle validation or calibration 4-6 Years
? Working experience in the automotive development for powertrain or vehicle electronics 1-3 Years
? Working experiences with control unit, bus communication and vehicle functional structure 1-3 Years
? Working experiences with high voltage systems like HV batteries and E-motors, electric energy converters and bus communication 1-3 Years
? Optional international experience based on working overseas incl. frequent business trips 1-3 Years
注：联系我时，请说是在海淀人才网上看到的。
工作地点
地址：沈阳铁西区沈阳市铁西经济接技术开发区宝马大道一号
求职提示：用人单位发布虚假招聘信息，或以任何名义向求职者收取财物（如体检费、置装费、押金、服装费、培训费、身份证、毕业证等），均涉嫌违法，请求职者务必提高警惕。
职位发布者
佟梦瑶HR
华晨宝马汽车有限公司
-
汽车·摩托车
-
1000人以上
-
中外合资（合资·合作）
-
朝阳区东三环北路霞光里18号佳程大厦B座25层
